diff --git a/evrisland/evrislandApp/Db/evr-island.template b/evrisland/evrislandApp/Db/evr-island.template
index d234ba86e1714a91e92985f4bc188df4d78dd653..b653b383235ccd31875e9c075eacbf116adf24fb 100644
--- a/evrisland/evrislandApp/Db/evr-island.template
+++ b/evrisland/evrislandApp/Db/evr-island.template
@@ -15,7 +15,7 @@ record(ao, "$(P)$(R=)CycleFreq-SP") {
 
 record(calc, "$(P)$(R=)CycleFreq-RB") {
     field(DESC, "Cycle frequency readback")
-    field(INPA, "$(EVRPREFIX)PS0-Rate-I CP")
+    field(INPA, "$(EVRPREFIX)PS-0-Rate-I CP")
     field(CALC, "A*1000000")
     field(PREC, "3")
     field(EGU, "Hz")
@@ -24,7 +24,7 @@ record(calc, "$(P)$(R=)CycleFreq-RB") {
 record(calcout, "$(P)$(R=)RFFreq-Divider") {
     field(INPA, "$(P)$(R=)CycleFreq-SP")
     field(CALC, "(88052500 / A)")
-    field(OUT,  "$(EVRPREFIX)PS0-Div-SP PP")
+    field(OUT,  "$(EVRPREFIX)PS-0-Div-SP PP")
     field(TPRO, "0")
 }
 
@@ -68,7 +68,7 @@ record(ao, "$(P)$(R=)RFSyncWdt-SP") {
     field(EGU, "us")
     field(DRVL, "1")
     field(DRVH, "10000")
-    field(OUT, "$(EVRPREFIX)DlyGen1-Width-SP PP")
+    field(OUT, "$(EVRPREFIX)DlyGen-1-Width-SP PP")
     info(autosaveFields_pass0, "VAL")
 }
 
@@ -111,10 +111,10 @@ record(calcout, "$(P)$(R=)#SetBeamWidth"){
 # Set fixed values
 record(seq, "$(P)$(R=)#SeqFixedVals") {
     field(DOL0, "$(P)$(R=)PrePulseDly-RB")
-    field(LNK0, "$(EVRPREFIX)DlyGen0-Delay-SP PP")
+    field(LNK0, "$(EVRPREFIX)DlyGen-0-Delay-SP PP")
 
     field(DOL1, "$(P)$(R=)HVSyncWdt-RB")
-    field(LNK1, "$(EVRPREFIX)DlyGen0-Width-SP PP")
+    field(LNK1, "$(EVRPREFIX)DlyGen-0-Width-SP PP")
 }
 
 # Pulser 1
@@ -122,7 +122,7 @@ record(calcout, "$(P)$(R=)#SetPulser1Dly"){
     field(INPA, "$(P)$(R=)PrePulseDly-RB")
     field(INPB, "$(P)$(R=)RFSyncDly-SP CP") # When updates value, update evr
     field(CALC, "A+B")
-    field(OUT, "$(EVRPREFIX)DlyGen1-Delay-SP PP" )
+    field(OUT, "$(EVRPREFIX)DlyGen-1-Delay-SP PP" )
 }
 
 # Pulser 2
@@ -131,7 +131,7 @@ record(calcout, "$(P)$(R=)#SetPulser2Dly"){
     field(INPB, "$(P)$(R=)RFSyncDly-SP CP") # When updates value, update evr
     field(INPC, "5") # Removing 5us, time for LLRF firmware 
     field(CALC, "A+B-C")
-    field(OUT, "$(EVRPREFIX)DlyGen2-Delay-SP PP" )
+    field(OUT, "$(EVRPREFIX)DlyGen-2-Delay-SP PP" )
 }
 
 # Pulser 3
@@ -140,7 +140,7 @@ record(calcout, "$(P)$(R=)#SetPulser3Dly"){
     field(INPB, "$(P)$(R=)RFSyncDly-SP CP") # When updates value, update evr
     field(INPC, "$(P)$(R=)RFSyncWdt-SP CP") # When updates value, update evr
     field(CALC, "A+B+C")
-    field(OUT, "$(EVRPREFIX)DlyGen3-Delay-SP PP" )
+    field(OUT, "$(EVRPREFIX)DlyGen-3-Delay-SP PP" )
 }
 
 # Pulser 4
@@ -149,7 +149,7 @@ record(calcout, "$(P)$(R=)#SetPulser4Dly"){
     field(INPB, "$(P)$(R=)RFSyncDly-SP CP") # When updates value, update evr
     field(INPC, "$(P)$(R=)BeamPulseDly-SP CP") # When updates value, update evr
     field(CALC, "A+B+C")
-    field(OUT, "$(EVRPREFIX)DlyGen4-Delay-SP PP" )
+    field(OUT, "$(EVRPREFIX)DlyGen-4-Delay-SP PP" )
 }
 
 # Pulser 5
@@ -159,14 +159,14 @@ record(calcout, "$(P)$(R=)#SetPulser5Dly"){
     field(INPC, "$(P)$(R=)BeamPulseDly-SP CP") # When updates value, update evr
     field(INPD, "$(P)$(R=)BeamPulseWdt-SP CP") # When updates value, update evr
     field(CALC, "A+B+C+D")
-    field(OUT, "$(EVRPREFIX)DlyGen5-Delay-SP PP" )
+    field(OUT, "$(EVRPREFIX)DlyGen-5-Delay-SP PP" )
 }
 
 # Pulser 6
 record(calcout, "$(P)$(R=)#SetPulser6Dly"){
     field(INPA, "$(P)$(R=)FIMDly-RB CP") # When updates value, update evr
     field(CALC, "A")
-    field(OUT, "$(EVRPREFIX)DlyGen6-Delay-SP PP" )
+    field(OUT, "$(EVRPREFIX)DlyGen-6-Delay-SP PP" )
 }
 
 # Set all initial values
@@ -187,13 +187,13 @@ record(seq, "$(P)$(R=)Seq0-Enable") {
     field(SELM, "All")
     # Load sequencer 0
     field(DOL0, "1")
-    field(LNK0, "$(EVRPREFIX)SoftSeq0-Load-Cmd CP")
+    field(LNK0, "$(EVRPREFIX)SoftSeq-0-Load-Cmd CP")
     # Commit sequencer 0
     field(DOL1, "1")
-    field(LNK1, "$(EVRPREFIX)SoftSeq0-Commit-Cmd CP")
+    field(LNK1, "$(EVRPREFIX)SoftSeq-0-Commit-Cmd CP")
     # Enable sequencer 0
     field(DOL2, "1")
-    field(LNK2, "$(EVRPREFIX)SoftSeq0-Enable-Cmd CP")
+    field(LNK2, "$(EVRPREFIX)SoftSeq-0-Enable-Cmd CP")
 
     field(TPRO, "0")
 }
@@ -206,7 +206,7 @@ record(calc, "$(P)$(R=)Cycle-Cnt")
     field(DESC, "Cycle Counter")
     field(CALC, "A")
     field(SCAN, "Passive")
-    field(INPA, "$(EVRPREFIX)SoftSeq0-NumOfStarts-I CPP")
+    field(INPA, "$(EVRPREFIX)SoftSeq-0-NumOfStarts-I CPP")
 }
 
 ########################################################
@@ -235,7 +235,7 @@ record(seq, "$(P)$(R=)SeqDisableAll") {
     
     # Disable sequencer 0
     field(DOL1, "1")
-    field(LNK1, "$(EVRPREFIX)SoftSeq0-Disable-Cmd CP")
+    field(LNK1, "$(EVRPREFIX)SoftSeq-0-Disable-Cmd CP")
     
     # Save current number of cycles
     field(DOL2, "$(P)$(R=)Cycle-Cnt")
@@ -356,11 +356,11 @@ record(mbbo, "$(P)$(R=)MixFreq") {
 record(seq, "$(P)$(R=)#SeqSetMixed"){
     # Get the current Frequency for Mixed Mode
     field(DOL0, "$(P)$(R=)MixFreq.RVAL")
-    field(LNK0, "$(EVRPREFIX)SoftSeq0-TrigSrc-0-Sel PP")
+    field(LNK0, "$(EVRPREFIX)SoftSeq-0-TrigSrc-0-Sel PP")
 
     # Commit sequencer 0
     field(DOL1, "1")
-    field(LNK1, "$(EVRPREFIX)SoftSeq0-Commit-Cmd CP")
+    field(LNK1, "$(EVRPREFIX)SoftSeq-0-Commit-Cmd CP")
 
     # Block Cycle Frequency from Island mode
     field(DOL2, "1")
@@ -376,11 +376,11 @@ record(seq, "$(P)$(R=)#SeqSetMixed"){
 record(seq, "$(P)$(R=)#SeqSetLocal"){
    # Get the current Frequency for Mixed Mode
     field(DOL0, "2")
-    field(LNK0, "$(EVRPREFIX)SoftSeq0-TrigSrc-2-Sel PP")
+    field(LNK0, "$(EVRPREFIX)SoftSeq-0-TrigSrc-2-Sel PP")
 
     # Commit sequencer 0
     field(DOL1, "1")
-    field(LNK1, "$(EVRPREFIX)SoftSeq0-Commit-Cmd CP")
+    field(LNK1, "$(EVRPREFIX)SoftSeq-0-Commit-Cmd CP")
 
     # Unblock Cycle Frequency from Island mode
     field(DOL2, "0")
@@ -396,9 +396,9 @@ record(seq, "$(P)$(R=)#SeqSetLocal"){
 record(seq, "$(P)$(R=)#SeqChgFreqMix"){
     # Get the current Frequency for Mixed Mode
     field(DOL0, "$(P)$(R=)MixFreq.RVAL")
-    field(LNK0, "$(EVRPREFIX)SoftSeq0-TrigSrc-0-Sel PP")
+    field(LNK0, "$(EVRPREFIX)SoftSeq-0-TrigSrc-0-Sel PP")
 
     # Commit sequencer 0
     field(DOL1, "1")
-    field(LNK1, "$(EVRPREFIX)SoftSeq0-Commit-Cmd CP")
+    field(LNK1, "$(EVRPREFIX)SoftSeq-0-Commit-Cmd CP")
 }
diff --git a/iocsh/evr-island-base.iocsh b/iocsh/evr-island-base.iocsh
index cb1314104e1b0a721cff287d94971cdb515c2e58..da0ea81590c50ac3e02fcfeeeb58b40673a0b210 100644
--- a/iocsh/evr-island-base.iocsh
+++ b/iocsh/evr-island-base.iocsh
@@ -33,97 +33,97 @@ dbLoadRecords("evrevent.db","EN=$(PREFIX)-$(Island_event), OBJ=$(OBJ), CODE=$(Is
 #- Backplane trigger line configuration / Front output
 
 # Pulser 0 - HV Sync -  Modulator
-afterInit("dbpf $(PREFIX):DlyGen0-Evt-Trig0-SP $(Island_event)")
-afterInit("dbpf $(PREFIX):DlyGen0-Delay-SP 100") # Pre-pulse delay
-afterInit("dbpf $(PREFIX):DlyGen0-Width-SP 100") # time in micro-seconds
-afterInit("dbpf $(PREFIX):DlyGen0-Label-I 'Modulator'") # Set labels
+afterInit("dbpf $(PREFIX):DlyGen-0-Evt-Trig0-SP $(Island_event)")
+afterInit("dbpf $(PREFIX):DlyGen-0-Delay-SP 100") # Pre-pulse delay
+afterInit("dbpf $(PREFIX):DlyGen-0-Width-SP 100") # time in micro-seconds
+afterInit("dbpf $(PREFIX):DlyGen-0-Label-I 'Modulator'") # Set labels
 ## FP 0 and 1
-afterInit("dbpf $(PREFIX):OutFP0-Src-SP 0")
-afterInit("dbpf $(PREFIX):OutFP1-Src-SP 0")
+afterInit("dbpf $(PREFIX):Out-FP0-Src-SP 0")
+afterInit("dbpf $(PREFIX):Out-FP1-Src-SP 0")
 ## FP UNIVTTL 0
-afterInit("dbpf $(PREFIX):OutFPUV0-Src-SP 0")
+afterInit("dbpf $(PREFIX):Out-FPUV0-Src-SP 0")
 
 # Pulser 1 - RF Sync 
-afterInit("dbpf $(PREFIX):DlyGen1-Evt-Trig0-SP $(Island_event)")
-afterInit("dbpf $(PREFIX):DlyGen1-Delay-SP 2000") # Pre-pulse delay + RF Sync Delay
-afterInit("dbpf $(PREFIX):DlyGen1-Width-SP 3000") # time in micro-seconds
-afterInit("dbpf $(PREFIX):DlyGen1-Label-I 'RF Start'") # Set labels
+afterInit("dbpf $(PREFIX):DlyGen-1-Evt-Trig0-SP $(Island_event)")
+afterInit("dbpf $(PREFIX):DlyGen-1-Delay-SP 2000") # Pre-pulse delay + RF Sync Delay
+afterInit("dbpf $(PREFIX):DlyGen-1-Width-SP 3000") # time in micro-seconds
+afterInit("dbpf $(PREFIX):DlyGen-1-Label-I 'RF Start'") # Set labels
 ## FP 1 and 2
-afterInit("dbpf $(PREFIX):OutFP2-Src-SP 1")
-afterInit("dbpf $(PREFIX):OutFP3-Src-SP 1")
+afterInit("dbpf $(PREFIX):Out-FP2-Src-SP 1")
+afterInit("dbpf $(PREFIX):Out-FP3-Src-SP 1")
 ## FP UNIVTTL 1, 2 and 3
-afterInit("dbpf $(PREFIX):OutFPUV1-Src-SP 1")
-afterInit("dbpf $(PREFIX):OutFPUV2-Src-SP 1")
-afterInit("dbpf $(PREFIX):OutFPUV3-Src-SP 1")
+afterInit("dbpf $(PREFIX):Out-FPUV1-Src-SP 1")
+afterInit("dbpf $(PREFIX):Out-FPUV2-Src-SP 1")
+afterInit("dbpf $(PREFIX):Out-FPUV3-Src-SP 1")
 
 # Pulser 2 - LLRF Start - TX17
-afterInit("dbpf $(PREFIX):DlyGen2-Evt-Trig0-SP $(Island_event)")
-afterInit("dbpf $(PREFIX):DlyGen2-Width-SP 2") # time in micro-seconds
-afterInit("dbpf $(PREFIX):OutBack1-Src-SP 2") # trigger from delay generator 2 to TX17
-afterInit("dbpf $(PREFIX):OutBack1-Label-I 'LLRF Start'") # Set labels
-afterInit("dbpf $(PREFIX):DlyGen2-Label-I 'LLRF Start'") # Set labels
+afterInit("dbpf $(PREFIX):DlyGen-2-Evt-Trig0-SP $(Island_event)")
+afterInit("dbpf $(PREFIX):DlyGen-2-Width-SP 2") # time in micro-seconds
+afterInit("dbpf $(PREFIX):Out-Back1-Src-SP 2") # trigger from delay generator 2 to TX17
+afterInit("dbpf $(PREFIX):Out-Back1-Label-I 'LLRF Start'") # Set labels
+afterInit("dbpf $(PREFIX):DlyGen-2-Label-I 'LLRF Start'") # Set labels
 
 #Pulser 3 - LLRF End - TX20
-afterInit("dbpf $(PREFIX):DlyGen3-Evt-Trig0-SP $(Island_event)")
-afterInit("dbpf $(PREFIX):DlyGen3-Width-SP 2") # time in micro-seconds
-afterInit("dbpf $(PREFIX):OutBack7-Src-SP 3") # trigger from delay generator 3 to TX20
-afterInit("dbpf $(PREFIX):OutBack7-Label-I 'LLRF End'") # Set labels
-afterInit("dbpf $(PREFIX):DlyGen3-Label-I 'LLRF End'") # Set labels
+afterInit("dbpf $(PREFIX):DlyGen-3-Evt-Trig0-SP $(Island_event)")
+afterInit("dbpf $(PREFIX):DlyGen-3-Width-SP 2") # time in micro-seconds
+afterInit("dbpf $(PREFIX):Out-Back7-Src-SP 3") # trigger from delay generator 3 to TX20
+afterInit("dbpf $(PREFIX):Out-Back7-Label-I 'LLRF End'") # Set labels
+afterInit("dbpf $(PREFIX):DlyGen-3-Label-I 'LLRF End'") # Set labels
 
 #Pulser 4 Beam Start - RX18
-afterInit("dbpf $(PREFIX):DlyGen4-Evt-Trig0-SP $(Island_event)")
-afterInit("dbpf $(PREFIX):DlyGen4-Width-SP 2") # time in micro-seconds
-afterInit("dbpf $(PREFIX):OutBack2-Src-SP 4") # trigger from delay generator 4 to RX18
-afterInit("dbpf $(PREFIX):OutBack2-Label-I 'Beam Start'") # Set labels
-afterInit("dbpf $(PREFIX):DlyGen4-Label-I 'Beam Start'") # Set labels
+afterInit("dbpf $(PREFIX):DlyGen-4-Evt-Trig0-SP $(Island_event)")
+afterInit("dbpf $(PREFIX):DlyGen-4-Width-SP 2") # time in micro-seconds
+afterInit("dbpf $(PREFIX):Out-Back2-Src-SP 4") # trigger from delay generator 4 to RX18
+afterInit("dbpf $(PREFIX):Out-Back2-Label-I 'Beam Start'") # Set labels
+afterInit("dbpf $(PREFIX):DlyGen-4-Label-I 'Beam Start'") # Set labels
 
 #Pulser 5 Beam End - TX18
-afterInit("dbpf $(PREFIX):DlyGen5-Evt-Trig0-SP $(Island_event)")
-afterInit("dbpf $(PREFIX):DlyGen5-Width-SP 2") # time in micro-seconds
-afterInit("dbpf $(PREFIX):OutBack3-Src-SP 5") # trigger from delay generator 5 to TX18
-afterInit("dbpf $(PREFIX):OutBack3-Label-I 'Beam End'") # Set labels
-afterInit("dbpf $(PREFIX):DlyGen5-Label-I 'Beam End'") # Set labels
+afterInit("dbpf $(PREFIX):DlyGen-5-Evt-Trig0-SP $(Island_event)")
+afterInit("dbpf $(PREFIX):DlyGen-5-Width-SP 2") # time in micro-seconds
+afterInit("dbpf $(PREFIX):Out-Back3-Src-SP 5") # trigger from delay generator 5 to TX18
+afterInit("dbpf $(PREFIX):Out-Back3-Label-I 'Beam End'") # Set labels
+afterInit("dbpf $(PREFIX):DlyGen-5-Label-I 'Beam End'") # Set labels
 
 # Pulser 6 - FIM Trigger - RX17
-afterInit("dbpf $(PREFIX):DlyGen6-Evt-Trig0-SP $(Island_event)")
-afterInit("dbpf $(PREFIX):DlyGen6-Width-SP 2") # time in micro-seconds
-afterInit("dbpf $(PREFIX):OutBack0-Src-SP 6") # trigger from delay generator 6 to RX17
-afterInit("dbpf $(PREFIX):OutBack0-Label-I 'FIM'") # Set labels
-afterInit("dbpf $(PREFIX):DlyGen6-Label-I 'FIM'") # Set labels
+afterInit("dbpf $(PREFIX):DlyGen-6-Evt-Trig0-SP $(Island_event)")
+afterInit("dbpf $(PREFIX):DlyGen-6-Width-SP 2") # time in micro-seconds
+afterInit("dbpf $(PREFIX):Out-Back0-Src-SP 6") # trigger from delay generator 6 to RX17
+afterInit("dbpf $(PREFIX):Out-Back0-Label-I 'FIM'") # Set labels
+afterInit("dbpf $(PREFIX):DlyGen-6-Label-I 'FIM'") # Set labels
 
 #######################################################
 ####### Pulsers for Frequency events from Global timing
 #######################################################
 
 # Pulser 8 - 0.5Hz
-afterInit("dbpf $(PREFIX):DlyGen8-Evt-Trig0-SP $(F0Hz5)")
-afterInit("dbpf $(PREFIX):DlyGen8-Width-SP 2") # time in micro-seconds
-afterInit("dbpf $(PREFIX):DlyGen8-Label-I '0.5 Hz from Global Timing'") # Set labels
+afterInit("dbpf $(PREFIX):DlyGen-8-Evt-Trig0-SP $(F0Hz5)")
+afterInit("dbpf $(PREFIX):DlyGen-8-Width-SP 2") # time in micro-seconds
+afterInit("dbpf $(PREFIX):DlyGen-8-Label-I '0.5 Hz from Global Timing'") # Set labels
 
 # Pulser 9 - 1Hz
-afterInit("dbpf $(PREFIX):DlyGen9-Evt-Trig0-SP $(F1Hz)")
-afterInit("dbpf $(PREFIX):DlyGen9-Width-SP 2") # time in micro-seconds
-afterInit("dbpf $(PREFIX):DlyGen9-Label-I '1 Hz from Global Timing'") # Set labels
+afterInit("dbpf $(PREFIX):DlyGen-9-Evt-Trig0-SP $(F1Hz)")
+afterInit("dbpf $(PREFIX):DlyGen-9-Width-SP 2") # time in micro-seconds
+afterInit("dbpf $(PREFIX):DlyGen-9-Label-I '1 Hz from Global Timing'") # Set labels
 
 # Pulser 10 - 2Hz
-afterInit("dbpf $(PREFIX):DlyGen10-Evt-Trig0-SP $(F2Hz)")
-afterInit("dbpf $(PREFIX):DlyGen10-Width-SP 2") # time in micro-seconds
-afterInit("dbpf $(PREFIX):DlyGen10-Label-I '2 Hz from Global Timing'") # Set labels
+afterInit("dbpf $(PREFIX):DlyGen-10-Evt-Trig0-SP $(F2Hz)")
+afterInit("dbpf $(PREFIX):DlyGen-10-Width-SP 2") # time in micro-seconds
+afterInit("dbpf $(PREFIX):DlyGen-10-Label-I '2 Hz from Global Timing'") # Set labels
 
 # Pulser 11 - 3.5Hz
-afterInit("dbpf $(PREFIX):DlyGen11-Evt-Trig0-SP $(F3Hz5)")
-afterInit("dbpf $(PREFIX):DlyGen11-Width-SP 2") # time in micro-seconds
-afterInit("dbpf $(PREFIX):DlyGen11-Label-I '3.5 Hz from Global Timing'") # Set labels
+afterInit("dbpf $(PREFIX):DlyGen-11-Evt-Trig0-SP $(F3Hz5)")
+afterInit("dbpf $(PREFIX):DlyGen-11-Width-SP 2") # time in micro-seconds
+afterInit("dbpf $(PREFIX):DlyGen-11-Label-I '3.5 Hz from Global Timing'") # Set labels
 
 # Pulser 12 - 7Hz
-afterInit("dbpf $(PREFIX):DlyGen12-Evt-Trig0-SP $(F7Hz)")
-afterInit("dbpf $(PREFIX):DlyGen12-Width-SP 2") # time in micro-seconds
-afterInit("dbpf $(PREFIX):DlyGen12-Label-I '7 Hz from Global Timing'") # Set labels
+afterInit("dbpf $(PREFIX):DlyGen-12-Evt-Trig0-SP $(F7Hz)")
+afterInit("dbpf $(PREFIX):DlyGen-12-Width-SP 2") # time in micro-seconds
+afterInit("dbpf $(PREFIX):DlyGen-12-Label-I '7 Hz from Global Timing'") # Set labels
 
 # Pulser 13 - 14Hz
-afterInit("dbpf $(PREFIX):DlyGen13-Evt-Trig0-SP $(F14Hz)")
-afterInit("dbpf $(PREFIX):DlyGen13-Width-SP 2") # time in micro-seconds
-afterInit("dbpf $(PREFIX):DlyGen13-Label-I '14 Hz from Global Timing'") # Set labels
+afterInit("dbpf $(PREFIX):DlyGen-13-Evt-Trig0-SP $(F14Hz)")
+afterInit("dbpf $(PREFIX):DlyGen-13-Width-SP 2") # time in micro-seconds
+afterInit("dbpf $(PREFIX):DlyGen-13-Label-I '14 Hz from Global Timing'") # Set labels
 
 # Set Initial values
 afterInit("dbpf $(PREFIX):#SetInitVals.PROC 1")
@@ -131,20 +131,20 @@ afterInit("dbpf $(PREFIX):#SetInitVals.PROC 1")
 # Configure sequencer
 
 
-afterInit("dbpf $(PREFIX):PS0-Div-SP 6289464")
+afterInit("dbpf $(PREFIX):PS-0-Div-SP 6289464")
 
 
-afterInit("dbpf $(PREFIX):SoftSeq0-RunMode-Sel Normal")
+afterInit("dbpf $(PREFIX):SoftSeq-0-RunMode-Sel Normal")
 
-afterInit("dbpf $(PREFIX):SoftSeq0-TrigSrc-2-Sel 'Prescaler 0'")
+afterInit("dbpf $(PREFIX):SoftSeq-0-TrigSrc-2-Sel 'Prescaler 0'")
 
-afterInit("dbpf $(PREFIX):SoftSeq0-TsResolution-Sel 'uSec'")
+afterInit("dbpf $(PREFIX):SoftSeq-0-TsResolution-Sel 'uSec'")
 
-afterInit("system 'caput -a $(PREFIX):SoftSeq0-EvtCode-SP 1 150'")
+afterInit("system 'caput -a $(PREFIX):SoftSeq-0-EvtCode-SP 1 150'")
 
-afterInit("system 'caput -a $(PREFIX):SoftSeq0-Timestamp-SP 1 0'")
+afterInit("system 'caput -a $(PREFIX):SoftSeq-0-Timestamp-SP 1 0'")
 
-afterInit("dbpf $(PREFIX):SoftSeq0-Load-Cmd 1")
-afterInit("dbpf $(PREFIX):SoftSeq0-Enable-Cmd 1")
-afterInit("dbpf $(PREFIX):SoftSeq0-Commit-Cmd 1")
+afterInit("dbpf $(PREFIX):SoftSeq-0-Load-Cmd 1")
+afterInit("dbpf $(PREFIX):SoftSeq-0-Enable-Cmd 1")
+afterInit("dbpf $(PREFIX):SoftSeq-0-Commit-Cmd 1")
 
diff --git a/iocsh/island_with_mrfioc.iocsh b/iocsh/island_with_mrfioc.iocsh
index aa6ed64277453ff6501b86ee6119ec498c756ba4..0f21f3bdfd9f6e7e80f37e57133c1670c1b7c063 100644
--- a/iocsh/island_with_mrfioc.iocsh
+++ b/iocsh/island_with_mrfioc.iocsh
@@ -5,7 +5,7 @@ require evrisland
 epicsEnvSet(PREFIX, "$(EVRPREFIX)")
 epicsEnvSet(PCI_SLOT, "$(EVRSLOT)")
 
-iocshLoad "$(mrfioc2_DIR)/evr.iocsh" "P=$(PREFIX), PCIID=$(PCI_SLOT), $(INITARGS=)"
+iocshLoad "$(mrfioc2_DIR)/evr.iocsh" "P=$(PREFIX), PCIID=$(PCI_SLOT), $(INITARGS=), EVRDB=$(EVRDB=evr-mtca-300-univ.db)"
 
 # - Load EVR Island application
 dbLoadRecords("evr-island.template", "P=$(PREFIX):, EVRPREFIX=$(PREFIX):")
@@ -14,5 +14,5 @@ iocshLoad("$(evrisland_DIR)/evr-island-base.iocsh")
 
 
 # Load default configuration from timing
-afterInit('iocshLoad($(mrfioc2_DIR)/evrr.iocsh                   "P=$(PREFIX), INTREF=$(INTREF=)")')
-afterInit('iocshLoad($(mrfioc2_DIR)/evrtclkr.iocsh               "P=$(PREFIX)")')
+afterInit('iocshLoad($(mrfioc2_DIR)/evr.r.iocsh                   "P=$(PREFIX), INTREF=$(INTREF=)")')
+afterInit('iocshLoad($(mrfioc2_DIR)/evrtclk.r.iocsh               "P=$(PREFIX)")')
diff --git a/iocsh/island_with_mrfioc_evm.iocsh b/iocsh/island_with_mrfioc_evm.iocsh
index 12b07dd7eaf8e026567bf6d458481e742758dc44..c69a5b1a0a2aa59cbf7748b6fafa59d8b37a9e91 100644
--- a/iocsh/island_with_mrfioc_evm.iocsh
+++ b/iocsh/island_with_mrfioc_evm.iocsh
@@ -5,7 +5,7 @@ require evrisland
 epicsEnvSet(PREFIX, "$(EVRPREFIX)")
 epicsEnvSet(PCI_SLOT, "$(EVRSLOT)")
 
-iocshLoad "$(mrfioc2_DIR)/evr.iocsh" "P=$(PREFIX), PCIID=$(PCI_SLOT), $(INITARGS=)"
+iocshLoad "$(mrfioc2_DIR)/evr.iocsh" "P=$(PREFIX), PCIID=$(PCI_SLOT), $(INITARGS=), EVRDB=$(EVRDB=evr-mtca-300-univ.db)"
 
 # - Load EVR Island application
 dbLoadRecords("evr-island.template", "P=$(PREFIX):, EVRPREFIX=$(PREFIX):")
@@ -14,5 +14,5 @@ iocshLoad("$(evrisland_DIR)/evr-island-base.iocsh")
 
 
 # Load default configuration from timing
-afterInit('iocshLoad($(mrfioc2_DIR)/evrr.iocsh                   "P=$(PREFIX), INTREF=#")')
-afterInit('iocshLoad($(mrfioc2_DIR)/evrtclkr.iocsh               "P=$(PREFIX)")')
+afterInit('iocshLoad($(mrfioc2_DIR)/evr.r.iocsh                   "P=$(PREFIX), INTREF=#")')
+afterInit('iocshLoad($(mrfioc2_DIR)/evrtclk.r.iocsh               "P=$(PREFIX)")')